日本玩具协会为保证14岁及14岁以下儿童使用的玩具的安全,特制定了“玩具安全标准(ST)”。S代表安全,T代表玩具。该标准为自愿性质的,符合该标准的产品才被允许在产品本身打上ST标志。ST标志系统还包括了受害者赔偿条款,以备标有ST标志的产品被投诉对消费者造成伤害时作出赔偿。在市场中携带该标志的产品必须在注册后每年都进行更新。一个产品的ST标志的有效期为四年,此后必须重新进行测试才能继续携带该标志。
Japan Toy Association in order to ensure the safety of the 14-year-old and toys intended for children under the age of 14, especially the development of safety standards for toys (ST). "S stands for safety, T on behalf of the toys. The standard is voluntary, products conforming to this standard are allowed to and marked ST logo in the product itself. The ST logo also includes the terms of the compensation of victims of complaint, prepared ST logo products to compensate harm to consumers. Products in the market to carry the flag after registration must be updated every year. A ST logo is valid for four years, after which must be re-tested in order to continue to carry the flag.
Reference Picture 图片参考:

如您有相关产品需要咨询,欢迎您直接来电4000-1998-38咨询我司工作人员,获得详细的费用报价与周期方案等。
上一篇:GB 20286 公共场所阻燃制品燃烧性能要求及标识
下一篇:2021年欧盟RED指令更新消息
- 精准控程 护航运维——电动执行机构行程控制精度测试
- 工业触摸屏表面硬度测试:标准解读与质量管理实践
- 微光识真筑牢感知防线——工业相机低照度成像可靠性测试解析
- 数控机床主轴径向跳动测试与GB/T 2423.2-2018高温环境适应性分析
- 自动导引车导航路径跟踪精度可靠性测试:方法与评估
- 电动滑台丝杠磨损测试技术规范:JB/T 12758-2023 标准解读与应用实践
- 解读GB/T 14257-2023:工业读码器解码速度测试的合规指南
- 车载以太网断线重连可靠性测试解析:GB/T 36283-2023标准实践指南
- 解读GB/T 25087-2023:汽车仪表盘背光均匀性测试的合规指南
- 车载摄像头图像干扰测试:GB/T 17626.3-2016标准详解与应用



